HSBK Categories HSBK Categories

 

Product filters Product filters

Suzuki

$180.70 $162.63
Developed in collaboration with best teams, this kit allows to adjust the shock wheelbase without remove the potentiometer, decreasing the shock setting...
In stock
Add to wish list

$260.00 $234.00
Designed on the basis of the consolidated and efficient Brembo master cylinder. The modification, according to FIM regulations, allows the combined use...
In stock
Add to wish list

$258.70 $232.83
Melotti Racing’s Impact Absorber for Solo WSSp dash has been developed to protect this indispensable dashboard from damages in case of fall. CNC machined...
In stock
Add to wish list

$46.40 $41.76
Melotti Racing Solo Engineering NextGen SSP Dash Cover Replacement Lens
In stock
Add to wish list

$386.40 $347.76
The Suzuki fork top bridge, designed for the littlest sister in the house of Iwata, our technical staff wanted to enclose in this component the most...
In stock
Add to wish list

$383.50 $345.15
The Suzuki fork top bridge, designed for the littlest sister in the house of Iwata, our technical staff wanted to enclose in this component the most...
In stock
Add to wish list

$22.99 $19.98
Prevents loss of coolant due to overheating Works on most water-cooled motorcycles, snowmobiles, and ATV's Designed for hot weather and/or...
In stock
Add to wish list

$3,375.00
Straight from the racetrack and now available in a street version. The lightest aluminum alloy wheel for street use. It leverages all of the extreme...
In stock

$100.00 $95.00
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$100.00 $95.00
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$110.00 $104.50
RaceSeats universal superbike seat pad is designed to fit most Superbike tail sections. Covered with a 3mm layer of high density special mousse that...
In stock

$279.50 $257.14
Spider 25mm Offset 25mm Riser Billet Clip-On Set (50, 51, 53) Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in...
In stock

$257.40 $236.81
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (50, 51, 52, 53, 55) Designed for track / racing...
In stock

$257.40 $236.81
Machined from solid billet aluminium Included a pair of Derlin bar-ends Availible in various diameters (41, 47, 50, 51, 52, 53) Designed for track /...
In stock

$220.00 $202.40
Machined from solid billet aluminium Universal fit. Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$115.70 $106.44
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$114.40 $105.25
Fits Spider Levers as well as various Brembo master cylinders Made in Italy
In stock

$115.70 $106.44
Machined from solid billet aluminium\ Perfect anodized finish Designed for track / racing use Made in Italy
In stock
Add to wish list

$156.00 $143.52
Machined from solid billet aluminum Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$137.80 $126.78
Fits Spider Levers as well as various Brembo master cylinders GP Style allow to replace the line quickly. Made in Italy
In stock
Add to wish list

$76.05 $69.97
Fits most sport bikes but not all models. Designed for track / racing use Made in Italy
In stock
Add to wish list

$27.30 $25.12
Machined from solid billet aluminium Perfect anodized finish 2 Pcs Set Made in Italy Also available individually (contact us)
In stock
Add to wish list

$8.53 $7.85
Sold individually Fit brake and clutch reservoirs High quality strong elastic and designed for motorcycles not tennis. Made in Italy
In stock

$55.90 $51.43
We use only certified materials of the very highest quality. The coating is provided by a renowned company with first class reputation in the racing world....
In stock
Add to wish list

$70.20 $64.58
Machined from billet aluminium Perfect anodized finish Designed for track / racing use Made in Italy
In stock

$76.70 $70.56
Spider Front Brake 4 Way Line Splitter Has location for brake pressure sensor. Designed for race / track use. Made in Italy
In stock

$49.40 $45.45
LED high-intensity rear rain light specially designed for race / track motorcycles. Can be attached to the rear of your bodywork with two fasteners (not...
In stock
Add to wish list

$24.70 $22.72
Shift Rod M6-M6 Left Designed for track / racing use Made in Italy
In stock

$81.90 $75.35
Pair of Derlin bar-ends included Designed for the spider clip-ons Designed for track / racing use Sold as a pair Made in Italy Note: Spider Clip-ons...
In stock

$76.70 $70.56
Limits steering radios on Race / Track bikes Made in Italy Not for use on street bikes. This item is for RACE ONLY. Being a RACE ONLY part requires an...
In stock
Add to wish list

$117.00 $107.64
Made from Aerospace Grade Alloy Includes gasket and vent tube ¼ Quick turn release Made in Italy Designed for the following bikes 2003 - 2019 SV...
In stock
Add to wish list

$257.40 $236.81
Specially designed for the 2023+ & Up Suzuki GSX-8R Machined from solid billet aluminum Included a pair of Derlin bar-ends Designed for track / racing...
In stock
Add to wish list

$416.00 $382.72
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$416.00 $382.72
Designed to protect the critical parts of your engine in the event of a crash 3 Piece Set Machined from solid billet aluminum Perfect anodized finish...
In stock
Add to wish list

$383.50 $352.82
Top triple clamp fork bridge which combines weight savings and performance. These are designed for more then just aesthetics and weight reduction: In fact,...
In stock
Add to wish list

$557.70 $513.08
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort....
In stock

$416.00 $382.72
3 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$279.50 $257.14
Must have for race teams Allows you to put the clip-ons back to the exact location saving time at the race track Made in Italy
In stock
Add to wish list

$76.70 $70.56
Designed with a special lip that keeps them attached to the wheel and prevents them from falling during wheel changes Super lightweight design Machined...
In stock
Add to wish list

$62.40 $57.41
These Axle Pulls install into the big end of the axle and make for much easier axle removal and installation, also acts as an axle slider for additional...
In stock
Add to wish list

$388.70 $357.60
Machined from solid billet aluminium Perfect anodized finish Fully adjustable Pedals rotate on bearings to ensure minimum effort. Designed for track /...
In stock

$239.20 $220.06
2 Piece Set Machined from solid billet aluminium Perfect anodized finish Designed to protect the critical parts of your engine in the event of a crash...
In stock
Add to wish list

$10.00 $9.20
Spider Uniball Female M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$12.00 $11.04
Spider Uniball Female M8 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.20
Spider Uniball Left Threaded Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$10.00 $9.20
Spider Uniball Male M6 Designed for track / racing use Made in Italy
In stock
Add to wish list

$49.40 $45.45
Spider Universal 14mm Fork Pre-Load Adjusters 2 Pcs Made in Italy 14mm Hex
In stock
Add to wish list

$58.50 $53.82
Spider Universal 14mm Fork Pre-Load Adjuster 1 Pcs Made in Italy 14mm Hex
In stock
Add to wish list

$38.35 $35.28
Sold in Pairs All tubes with inside diameter from 13mm to 18mm 3 special rubber couples for various diameters that make it universal Kit ready to...
In stock

$180.70 $166.24
Machined from billet aluminium Perfect anodized finish Adjustable & Folding Designed for track / racing use Made in Italy
In stock
Add to wish list

$49.40 $45.45
We are proud to introduce our new chain guard wing printed with cutting-edge 3D SLS printing technology! Lightweight like carbon fiber but more durable and...
In stock
Add to wish list

$58.50 $53.82
We are proud to introduce our new chain guard wing printed with cutting-edge 3D SLS printing technology! Lightweight like carbon fiber but more durable and...
In stock
Add to wish list

$159.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$59.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$159.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only This is a SBK spec line that splits at the lower triple...
In stock

$59.95
Spiegler Performance quality that you have come to expect. Designed for race / track use only New crush washers are included Can be fully customizable
In stock

$179.00
Staubli Dry Brake Plug / quick disconnect, UNF 3/8-24" JIC plug, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$274.00
Staubli Dry Brake Socket / quick disconnect, M10x1.00 socket, billet aluminum, anodized. Will seal with any M10x1.00 banjo wth crush washer. Swiss...
In stock
Add to wish list

$204.00
Staubli Dry Brake Socket / quick disconnect, UNF 3/8-24" JIC socket, billet aluminum, anodized. Needs Spiegler fitting type 633 on brake line. As the...
In stock
Add to wish list

$319.00
Dry Brake Socket / quick disconnect, with 20 degree banjo fitting, billet aluminum, anodized. This banjo fitting (10mm, 3/8") quick disconnect can be...
In stock
Add to wish list

$229.00
Staubli Bleeder Plug M10x1.00 with Cap; material plug: stainless steel; material cap:billet aluminum, anodized. This clean-break, non spill design,...
In stock
Add to wish list

$274.00
Staubli Socket for Bleeder Plug; material: billet aluminum, anodized. This clean-break, non spill design, coupling prevents any loss of brake fluid and...
In stock
Add to wish list

$1,069.90 $984.31
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock

$1,241.50 $1,142.18
STM
Wet slipper clutch Comes with all necessary hardware for installation Professional installation recommended Made in Italy The hearth of STM slipper...
In stock