HSBK Categories HSBK Categories

 

Product filters Product filters

Parts

$98.00
Mounting bracket kit for AIM Solo-2 GPS lap timers/data loggers. Designed for the following models: Ducati 899 / 959 / 1199 / 1299 / V2 / V4
In stock
Add to wish list

$105.00
Small plug in module enabling the standard electronic steering damper to be disconnected and replaced without having error messages on the dashboard....
In stock
Add to wish list

$247.50
Small plug in modules enabling the standard 'DES' electronic suspension devices to be disconnected and replaced without having error messages on the...
In stock
Add to wish list

$214.50
CBE
Gearshift shaft support & Sprocket cover for Aprilia RS 660 / Tuono 660 (all versions) Main features: Plug & Play installation Needed hardware included...
In stock

$189.95
CBE
CBE / HSBK frame sliders are designed to protect your Aprilia’s major components in the event of a crash or tip over. Each slider features an aluminum base...
In stock
Add to wish list

$150.67
CBE
CBE Aprilia RSV4 Tuono V4 Aluminum Billet Coolant Manifold Elbows (2010 To 2025) Replaces OEM plastic part that's often subject to breakages or deformed...
In stock
Add to wish list

$134.81
CBE
CNC coolant manifold for Aprilia RSV4 / Tuono V4 (all m.y.), no anodization. Main features: Replace OEM part made by plastic, often subject to...
In stock
Add to wish list

$214.50
CBE
Gearshift shaft support & Sprocket cover for Aprilia RSV4/TV4 (all versions) Main features: Plug & Play installation Needed hardware included Strong,...
In stock
Add to wish list

$259.95
CBE
CNC MANIFOLD – THERMOSTATIC VALVE REMOVER FOR DUCATI PANIGALE V4 ALL M.Y. Main features: Replace OEM part made by plastic, that could be subject...
In stock

$149.98
CCW
CCW EFI Fuel Pumps for Ducati Most 2003+ models with fuel flanges. The "holster" or "saddle" type fuel pump as used in fuel pump modules on Ducati...
In stock
Add to wish list

$39.98
CCW
This aluminum fuel sender nut sits at the top of the sender unit. Note: You will need to remove the pins from the electrical connector on the sender unit...
In stock
Add to wish list

$149.98
CCW
CCW replacement for efi-type fuel pumps used on Ducatis from 1992 through 2002. Also replaces Bosch part number 0 580 453 408, which was also supplied by...
In stock
Add to wish list

$54.98
CCW
Belts for 748R Replaces OE 737.4.017.1A Sold individually
In stock
Add to wish list

$61.99
CCW
Belts for Ducati Superbike 1198, 1098, 848 Diavel, Streetfighter, Multistrada 1200 Replaces OE 737.4025.1A Sold individually
In stock
Add to wish list

$54.98
CCW
Belts for Ducati All Testastretta Superbike 999, 749, 998, 996R, Monster S4Rs, S4R (07-up) Replaces OE 737.4012.4A Sold individually
In stock
Add to wish list

$54.98
CCW
Ducati Superbike 996, 916, 888,851, 748 (95-01*) 2001 748 owners please double check your OE belt part number. 2001 was a transitional year so some get...
In stock
Add to wish list

$54.98
CCW
Ducati All 1000 and 1100 2V engines, Hypermotard 1100, Sport Touring ST3, Monster 1100, 1000, S2R 1000, Paul Smart, Sport Classic 1000, Multistrada 1100,...
In stock
Add to wish list

$54.98
CCW
Belts for F1, F3, Pantah: 750/650/500/400/350 Replaces OE 0660.29.090 Sold individually
In stock
Add to wish list

$54.98
CCW
Belts for Ducati 900ss, M900, MH900e, ST2 Replaces OE 737.1001.1A, 737.4002.2A Sold individually
In stock
Add to wish list

$54.98
CCW
Belts for Ducati Monster S2R800, 800, 695, 620, 600-750 (1997-up), Sport 800, 750, 620, Supersport 800, 750, Multistrada 620 Replaces OE 737.1005.1A or...
In stock
Add to wish list

$54.98
CCW
Belts for Ducati Monster 696, 796, & HM796 Replaces OE 737.4024.1A Sold individually
In stock
Add to wish list

$54.98
CCW
Belts for Ducati S4R, ST4, ST4S, S4, 02-03 748 Replaces OE 737.1010.1A, 737.4010.2B or 737.4010.3B Sold individually
In stock
Add to wish list

$649.95
The GP Race slip-on silencer from Competition Werkes is a race inspired design straight from MotoGP. This short exhaust is super light weight and easy to...
In stock
Add to wish list

$499.95
The GP slip-on silencer from Competition Werkes is a race inspired design straight from MotoGP. This short exhaust is super light weight and easy to...
In stock

$649.95
The GP Race slip-on silencer from Competition Werkes is a race inspired design straight from MotoGP. This short exhaust is super light weight and easy...
In stock
Add to wish list

$689.95
Reduce weight while improving the looks, sound and performance of your Aprilia The GP Race slip-on silencer from Competition Werkes is a race inspired...
In stock
Add to wish list

$499.95
The GP slip-on silencer from Competition Werkes is a race inspired design straight from MotoGP. This short exhaust is super light weight and easy to...
In stock

$129.95 $116.95
2009+ Aprilia RSV4 & Tuono V4 Fender Eliminator Kit LED turn signals and licence plate light included Takes approx 1 hour to install with...
In stock
Add to wish list

$499.95

2010-2014 BMW S1000RR, 14+ S1000R GP Slip On Exhaust

In stock

$129.99 $116.99
Competition Werkes integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!
In stock

$119.95 $107.95
Relocates license plate and license light.
In stock
Add to wish list

$99.99 $89.99
Competition Werkes integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!
In stock

$119.95 $107.95
Relocates license plate and license light.
In stock
Add to wish list

$139.95 $125.95
This kit relocates your license plate to the rear of your bike, below the tail light. This kit is made from CNC cut, quality stainless steel LED license...
In stock
Add to wish list

$969.95
Hand Crafted from 304 Stainless Steel Gain of 4.5 Horsepower Weight savings of 8 lbs Tapered baffle for better performance & advanced tuning No...
In stock

$149.95 $134.95
This kit relocates your license plate to the rear of your bike, below the tail light. This kit is made from CNC cut, quality stainless steel- LED license...
In stock
Add to wish list

$159.95 $143.95
This kit relocates your license plate to the rear of your bike, below the tail light. Made from CNC cut 304 stainless steel Vent mounted smoked LED turn...
In stock
Add to wish list

$1,699.95
Hand Crafted from 304 Stainless Steel Tapered baffle for better performance and advanced tuning No returns accepted on color modified exhausts. “FOR...
In stock

$159.95 $143.95
This kit relocates your license plate to the rear of your bike, below the tail light. Made from CNC cut 304 stainless steel Vent mounted smoked LED...
In stock
Add to wish list

$234.99 $211.49

Competition Werkes integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!

In stock

$159.95 $143.95
This kit relocates your license plate to the rear of your bike, below the tail light. Made from CNC cut 304 stainless steel Vent mounted smoked LED turn...
In stock
Add to wish list

$1,699.95
Hand Crafted from 304 Stainless Steel Tapered baffle for better performance and advanced tuning No returns accepted on color modified exhausts. “FOR...
In stock

$159.95 $143.95
This kit relocates your license plate to the rear of your bike, below the tail light. Made from CNC cut 304 stainless steel Vent mounted smoked LED...
In stock
Add to wish list

$109.95 $98.95
Pivot mount plate for access to storage key LED license light Requires drilling Installs in about an hour
In stock
Add to wish list

$499.95
Over 12lbs lighter than stock. Hand crafted from 304 stainless steel. Tapered baffle for better performance and advanced tuning. Incredible exhaust...
In stock

$49.95 $44.95
This Ducati Servo Eliminator module allows you to remove the factory exhaust valve servo motor and cables Simply remove your servo motor and plug this...
In stock

$139.95 $125.95
All stainless steel kit. This kit is made from CNC cut, quality stainless steel LED license light included Rear turn signal located below wing...
In stock
Add to wish list

$99.99 $89.99

Competition Werkes integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!

In stock

$139.95 $125.95
This kit relocates your license plate to the rear of your bike, below the tail light. This kit is made from CNC cut, quality stainless steel LED...
In stock
Add to wish list

$139.95 $125.95
This kit relocates your license plate to the rear of your bike, below the tail light. This kit is made from CNC cut, quality stainless steel LED license...
In stock
Add to wish list

$489.95
Made from CNC laser cut 304 Stainless Steel Unique tapered baffle for added performance Deep healthy exhaust note Comes with removable insert (already...
In stock

$499.95
2013+ Ducati Hyperstrada Werkes GP Slip On Exhaust “FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE” or “LEGAL IN CALIFORNIA ONLY FOR...
In stock

$569.95
Easy install. Less than 10 minutes. Over 9 pounds lighter than stock. Tapered baffle for better performance and advanced tuning. No returns accepted...
In stock


$149.95 $134.95
Monster 1200 Fender Eliminator Kit w/Lic Light & Signals Not compatible with factory grab handles Not compatible with the Monster 1200R Fits 2012 to 2016
In stock
Add to wish list

$139.99 $125.99

Competition Werkes integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!

In stock

$99.99 $89.99

Competition Werkes Integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!

In stock

$849.95
Hand Crafted from 304 Stainless Steel Tapered baffle for better performance and advanced tuning No returns accepted on color modified exhausts. “FOR...
In stock

$129.95 $116.95
This kit is made from CNC cut, quality stainless steel Relocates seat lock mechanism LED license plate light included Hardware and detailed photo...
In stock
Add to wish list

$129.95 $116.95
Relocates seat lock. Includes LED License light Installs in 1 hour.
In stock
Add to wish list

$149.95 $134.95
Monster Fender Eliminator Kit w/Lic Light & Signals Fits the following: 797 (2017-2020) 821 (2018-2020) 1200 (2017-2021) Supersport (2017-2021)...
In stock
Add to wish list

$99.95 $89.95

Competition Werkes Integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!

In stock

$119.95 $107.95
This kit relocates your license plate to the rear of your bike, below the tail light. This kit is made from CNC cut, quality stainless steel Relocates...
In stock
Add to wish list

$129.99 $116.99

Competition Werkes Integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!

In stock

$599.95
Hand welded in the USA 304 Stainless Steel Easy install Electronic Servo Eliminator Included Over 9 pounds lighter than stock....
In stock

$599.00
Easy install. Less than 10 minutes. Over 9 pounds lighter than stock. Tapered baffle for better performance and advanced tuning. No returns...
In stock

$99.95 $89.95
2015+ Ducati Scramber Fender Eliminator Kit ANY modification to a motorcycle may render it illegal for use on public roads. Please check with local laws...
In stock
Add to wish list

$109.95 $98.95
Only fits the Full Throttle edition ANY modification to a motorcycle may render it illegal for use on public roads. Please check with local laws to...
In stock
Add to wish list

$159.99 $143.99

Competition Werkes integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!

In stock

$139.95 $125.95
This kit relocates your license plate to the rear of your bike, below the tail light. This kit is made from CNC cut, quality stainless steel LED license...
In stock
Add to wish list

$99.99 $89.99

Competition Werkes Integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!

In stock

$149.95 $134.95
This kit moves your license plate forward between the rider seat and rear tire. This kit is made from CNC cut, quality stainless steel LED license light...
In stock
Add to wish list

$149.95 $134.95
SuperSport Fender Eliminator Kit w/Lic Light & Signals Fits the following: 797 (2017-2020) 821 (2018-2020) 1200 (2017-2021) Supersport (2017-2021)...
In stock
Add to wish list

$1,399.95
The Competition Werkes exhaust slip-on for the 17-20 Ducati Supersport is made from the finest stainless steel tubing, welded not bent to prevent weak spots...
In stock

$1,399.95
The Competition Werkes exhaust slip-on for the 21+ Ducati Supersport is made from the finest stainless steel tubing, welded not bent to prevent weak spots...
In stock

$119.98 $107.98
This kit relocates your license plate to the rear of your bike, below the tail light. Relocates license plate and stock turn signals Black powder coating...
In stock
Add to wish list

$234.95 $211.45

Competition Werkes integrated Tail Lights take your rear turn signals and move them into your tail light. The LED matrix voids the need of ever replacing bulbs!

In stock

$2,799.95
Hand Crafted from 304 Stainless Steel Tapered baffle for better performance and advanced tuning No returns accepted on color modified exhausts. “FOR...
In stock
Add to wish list


$699.95
2013+ CBR600RR Dual Slip-On Exhaust “FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE” or “LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES...
In stock

$49.95 $44.95
This Honda Servo Eliminator module allows you to remove the factory exhaust valve servo motor and cables Simply remove your servo motor and plug this...
In stock

$729.95
13+ Honda MSX125 Grom Full System Werkes Exhaust “FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE” or “LEGAL IN CALIFORNIA ONLY FOR...
In stock

$49.95 $44.95
This Kawasaki Servo Eliminator module allows you to remove the factory exhaust valve servo motor and cables Simply remove your servo motor and plug this...
In stock
Add to wish list

$599.95
2016+ ZX10R Race Slip On Exhaust “FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE” or “LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES...
In stock
Add to wish list

$569.95
05-06 ZX6r/rr Slip On Exhuast “FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE” or “LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH...
In stock

$599.95
2013+ ZX6R Race Slip On Exhaust “FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE” or “LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES...
In stock
Add to wish list

$649.95
KTM Superduke 1290 “FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE” or “LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER...
In stock

$119.95 $107.95
KTM Duke 390 Fender Eliminator: Relocates license plate and stock turn signals Black powder coating over stainless steel Turn signal brackets fit stock...
In stock
Add to wish list

$489.95
2017+ KTM Duke 390 Slip-On Exhaust Replaces stock muffler Retains catalytic converter and main canister If you would like to delete the...
In stock

$89.95 $80.95
Removes only the catalytic converter Does not delete the muffler or main canister Hand welded 304 stainless steel Fits: RC390 2017- 390 Duke 2017-...
In stock

$549.95
GP Slip-On Exhaust for 2015, 2016 KTM 390, Duke 390 RC Slip-On Exhaust “FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE” or “LEGAL IN...
In stock

$49.95 $44.95
This Suzuki Servo Eliminator module allows you to remove the factory exhaust valve servo motor and cables Simply remove your servo motor and plug this...
In stock

$349.98

2003-09 Suzuki SV650 Slip-On Exhaust

In stock

$1,154.95
Wake up the performance, looks and sound of your Rocket 3. The stock exhaust weighs nearly 28 lbs, the WerkesUSA exhaust weighs only 5.1 lbs. That's a...
In stock

$479.95
Easy install. Less than 20 minutes. Over 10 pounds lighter than stock. Tapered baffle for better performance and advanced tuning. No returns...
In stock

$479.95
Easy install. Less than 20 minutes. Over 10 pounds lighter than stock. Tapered baffle for better performance and advanced tuning. No returns...
In stock

$139.95 $125.95
This kit relocates your license plate to the rear of your bike, below the tail light. This kit is made from CNC cut, quality stainless steel LED license...
In stock
Add to wish list

$129.95 $116.95
2013-17 Triumph Daytona/ 2013-18 Street Triple Integrated Taillight Shadow - Black reflector with clear lens. Blackout- Black reflector with tinted...
In stock

$49.95 $44.95
This Yamaha Servo Eliminator module allows you to remove the factory exhaust valve servo motor and cables Simply remove your servo motor and plug this...
In stock
Add to wish list

$449.98

2014+ Yamaha FZ-09 GP Slip On Exhaust

In stock

$869.95

2015+ Yamaha R1 Race Exhaust


In stock
Add to wish list



$119.95
The Cox Racing Radiator Guard protects the Aprilia RS660 radiator from damage while allowing cooling air to pass through '“ and look good at the same time....
In stock

$174.95 $157.46

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$144.95 $130.46

Cox Racing Group radiator and oil cooler guards are cheap insurance against damage that can not only stop you in your tracks, but also cause serious injury in the event of a crash. It's engine protection that also looks good. Each kit includes a radiator guard and a separate oil cooler guard that's easy to install.

In stock

$189.95 $170.96

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$134.95
Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.
In stock

$134.95
Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.
In stock

$134.95
Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.
In stock

$199.95
Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.
In stock

$134.95
Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.
In stock

$159.95

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$99.99
Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.
In stock

$179.95

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$169.95
Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.
In stock

$134.95
Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.
In stock

$109.95 $98.96

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$154.95
Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.
In stock

$179.95
Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.
In stock

$219.95

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$89.95 $80.96

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$89.95

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$119.95 $107.96

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$109.95 $98.96

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$109.95 $98.96

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$179.95 $161.96

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock

$179.95

Cox Racingroup radiator guards are made to protect vulnerable Radiators and Oil Coolers from all types of debris found on the street or track.

In stock